Lightweight castable is mainly made of aluminate cement, high alumina fine material, ceramsite and other additives. Lightweight refractory castable sales with light volume, high compressive strength, acid and acid gas corrosion resistance, heat insulation, heat preservation, low water absorption characteristics.
The series of refractory insulation castable is composed of lightweight refractory aggregate and powder, and the binder admixture is called lightweight castable. Lightweight refractory castable sales are mainly used in high chimney, high temperature flue and air duct lining, petroleum, chemical, nonferrous metallurgy and other industries acid tank, tank and other acid resistant engineering.
The type and amount of cement, refractory powder and light aggregate used in lightweight castable refractory are not the same, so are their functions. The reduction of water consumption and the improvement of strength with the addition of water-reducing agent are remarkable. The addition with small bulk density can reduce the volume density of castable and improve its heat insulation function, but the strength is reduced twice, and the more the dosage is, the more significant it is. Therefore, according to the working conditions of the furnace and the position of castable, the reasonable selection of lightweight refractory castable can achieve the intention of energy saving.
The manufacturing and molding of lightweight refractory castables are essentially the same as refractory castables. The difference is that the bulk weight of light aggregate is small, easy to absorb water, so the weight of light aggregate should be weighed, poured into the forced mixer, first add half of the water, wet mixed evenly, then add refractory powder and cement, and add the rest of the water mixing. When forming, aggregate is easy to float up, forming layers, so the vibration time to be shorter, should be controlled. Lightweight refractory castable sales shall be maintained in a wet environment after initial setting in accordance with a professional process. 1 day after the removal of mold, Portland cement and CA-50 cement lightweight refractory castable samples, should be maintained for 6 days and 2 days. Then, check its functionality. The drying compressive strength is greater than 6Mpa. With the increase of heating temperature, the strength decreases. When it reaches 1300℃, the strength increases, which is caused by the sintering of powder.
This series of refractory castable is easy to construct and is the most ideal product for alkali resistant parts at high temperature. Mainly according to the porosity, binder, aggregate classification. In practice, it is often classified by the use of temperature or functional characteristics. According to the porosity, there are two kinds of dense castable material and insulation burning material with the porosity not less than 45%. According to the binder there are hydraulic binding, chemical binding, coagulated binding castable. There are clay aggregate, high alumina aggregate, silicon aggregate, alkaline aggregate, special aggregate and insulation aggregate.
Zhengzhou Rongsheng Kiln Refractory Co.,Ltd. is professional refractory castable manufacturer. Over the years, we are committed to the production of high-quality refractory materials, and more than 60 countries and regions reached friendly relations of cooperation with customers. Refractory products stable quality, complete varieties, worthy of customer trust, welcome to purchase, we will serve you wholeheartedly.
